Product List

• P500-K / 1.5MM :: STD TYPE K PLUG, HOLLOW PIN 1.5MM GROMME
• P500-K-G :: STANDARD PLUG TYPE K LOOP CONNECTOR
• P500-KP :: STANDARD PLUG FOR PUT ON
• P500-TP :: PUT ON STANDARD PLUG / TYPE T
• PI-M12X1.5HSF-062 :: Custom Polaris Compression Fitting, .062 ” or 1/16” Dia. Bore Thru X M12X1.5MM Male Thread, 11/16” Hex, 303 Stainless Steel Compression Fitting w/t Stainless Ferrule. (ORV Oil Drain Plug)
• PI-TI-WF062SS :: Custom Direct Weld Bore Thru Compression Fitting Assembly .062” or 1/16” 303SS Cap, 303SS Single Ferrule, 304SS Direct Weld Body
• PI-TI-WF125SS :: Custom Direct Weld Bore Thru Compression Fitting Assembly .125” or 1/8” 303SS Cap, 303SS Single Ferrule, 304SS Direct Weld Body
• PM-T54OG12-1X18PP-1XM10X1.25 :: Custom Special for Pratt & Miller ½” Dia. X 4 Inch OAL, Brass Hose Coupling w/t 1, 1/8 Female NPT Port & 1, M10X1.25 Port
• PM-T54OG34-1X18PP-1XM10X1.25 :: Custom Special for Pratt & Miller ¾” or .75” Inch OD X (4 Inch OAL. Length) BRASS HOSE COUPLING w/t 1, 1/8 FNPT Port & 1, M10X1.25 Port
• PM-T54OG58-1X18PP-1XM10X1.25 :: Custom Special for Pratt & Miller 5/8” Dia. X 4 Inch OAL, Brass Hose Coupling w/t 1, 1/8 Female NPT Port & 1, M10X1.25 Port
• PMIR-KA :: K-TYPE, PANEL INSERT FOR THERMOCOUPLE MOUNTING BY MEANS OF TWO SCREWS AT THE FRONT.
• PMIR-NA :: MINI PANEL INSERT
• PMIR-RA :: MINI PANEL INSERT TYPE R
• PMIR-TA :: T TYPE PANEL INSERT
• PSIFB-J :: Standard Panel Insert - Flanged- Type J
• R26AU12CSLE12T-S :: THERMOCOUPLE
• R26AU4CSLE12T-SB :: THERMOCOUPLE
• R26AU6CSLE12T-SB :: THERMOCOUPLE
• R26OU6CSLE120T-4 :: THERMOCOUPLE
• RBCGL-GW04A-00 :: THERMOCOUPLE
• REC-01 :: 17 FT WIRE HARNESS NUMBERS 001-013
• REC-02 :: 17 FT WIRE HARNESS NUMBERS 019-034 TYPE J
• REC-03 :: 17 FT REPLACEMENT FOR HARNESS TYPE J
• REC-04 :: 17 FT WIRE HARNESS NUMBERS 001-013 TYPE K
• REC-05 :: 17 FT REPLACEMENT WIRE FOR HARNESS TYPE K
• REC-06 :: 25 FT WIRE HARNESS TYPE K NUMBERS 001-02 0
• REC-07 :: 25 FT REPLACEMENT WIRE FOR HARNESS TYPE K
• REWORK 1 :: REWORK1
• REWORK-T26 :: REWORK
• REWORK2 :: REWORK2
• RHEEM AIR CERT :: 17025 LOT CALIBRATION Lot Calibration: 4 Point Temperature : 32°F, 88°F, 144°F & 200°F (Send Cal. Report w/ Wire Spools)
• RP-T52MESPD/SGD-24K-R2T-30 :: K-TYPE ENCAPSULATED WIRE THERMOCOUPLE / 24 INCH, 30 GA SOLID WIRE TEFLON INSULATION WITH STAINLESS STEEL OVERBRAID / MOLDED ON MINI PLUG NO LOGO / SHRINK STRAIN RELIEF
• RUBBING TC-E :: 60 IN TYPE E WIRE RUBBING T/C SPRING LOA DED
• RUBBING TC-J :: 36 IN TYPE J GROUNDED WIRE RUBBING T/C SPRING LOADED
• RUBBING TC-J-60 :: 60 IN TYPE J GROUNDED WIRE RUBBING T/C
• RUBBING TC-J-U :: 36 IN TYPE J UNGROUNDED WIRE RUBBING T/C SPRING LOADED
• RUBBING TC-K :: 36 IN TYPE K GROUNDED WIRE RUBBING T/C SPRING LOADED
• RUBBING TC-K-321 :: 36 IN TYPE K GROUNDED WIRE RUBBING T/C S PRING LOADED
• RUBBING TC-K-60 :: 60 IN TYPE K GROUNDED WIRE RUBBING T/C S PRING LOADED
• RUBBING TC-K-72 :: 72 IN TYPE K GROUNDED WIRE RUBBING T/C S PRING LOADED
• RUBBING TC-K-HP :: 36 IN TYPE K HIGH PERFORMANCE RUBBING T/C
• RUBBING TC-K-HP-U-48 HT-4G :: HIGH PERFORMANCE, K-TYPE RUBBING T/C, UNGROUNDED JUNCTION, 48IN, STRANDED 22AWG HIGH TEMP FIBERGLASS INSULATION. OPEN WIRE LEAD
• RUBBING TC-K-MJ-G-48 :: 48 INCH TYPE K RUBBING T/C, MINI JACK, GROUNDED
• RUBBING TC-K-MPG36-4F :: 36 INCH TYPE K RUBBING T/C MOLDED ON PLUG, GROUNDED, STRANDED FIBERGLASS LEAD WIRE
• RUBBING TC-K-MPU-60-4K :: 60 INCH TYPE K, UNGROUNDED RUBBING T/C, PUT ON MINI PLUG, STRANDED KAPTON LEAD
• RUBBING TC-K-MU :: 36 IN TYPE K UNGROUNDED WIRE RUBBING T/C SPRING LOADED
• RUBBING TC-K-MU-4T :: 36 IN LONG RUBBING T/C, MINI PLUG, STRANDED TEFLON LEAD WIRE.
• RUBBING TC-K-U-3 :: 36 IN TYPE K UNGROUNDED WIRE RUBBING T/C SPRING LOADED
• RUBBING TC-K-U-36 :: 36 IN TYPE K UNGROUNDED WIRE RUBBING T/C SPRING LOADED
• RUBBING TC-K-U-360 :: 360 INCH UNGROUNDED RUBBING T/C SS OVERBRAID SOLID FIBERGLASS WIRE
• RUBBING TC-K-U-4 :: 48 IN TYPE K UNGROUNDED WIRE RUBBING T/C SPRING LOADED
• RUBBING TC-K-U-48 HT :: 48 IN TYPE K UNGROUNDED WIRE RUBBING T/C SPRING LOADED - HIGH TEMP WIRE - HIGH TEMP BRAZE
• RUBBING TC-KAP :: 36 IN TYPE K GROUNDED WIRE RUBBING T/C S PRING LOADED
• RUBBING TC-T :: 36 IN TYPE T WIRE RUBBING T/C SPRING LOA DED
• RUBBING-K-TC-HPSSHR15MM-G-48G-22 :: Special High-Performance Sled Style Head Rubbing T/C, K-TYPE, Grounded Junction, 1.3 lb. Spring Loaded Rubbing T/C, 48inch, Open Stripped 22 Awg Stranded Wire Lead w/t High Temp. Fiberglass Insulation & Jacketing. 15MM Rubbing Face w/t Yellow Wire Cover Jacketing
• RUBBING-K-TC-HPSSHR15MM-G-R36F22 :: SPECIAL HIGH PERFORMANCE SLED STYLE HEAD RUBBING T/C, K-TYPE, FULL THREADED BODY, GROUNDED JUNCTION, 1.3 LB SPRING LOADED RUBBING T/C, 36INCH, OPEN STRIPPED 22 AWG STRANDED WIRE LEAD WITH FIBERGLASS INSULATED & STAINLESS STEEL OVERBRAID, 15MM RUBBING FACE
• RUBBING-K-TC-HPSSHR15MM-G-R72F :: SPECIAL HIGH PERFORMANCE SLED STYLE HEAD RUBBING T/C, K TYPE, GROUNDED JUNCTION, 1.3 LB SPRING LOADED RUBBING T/C, 72 INCH, OPEN STRIPPED 24 AWG STRANDED WIRE LEAD W/ FIBERGLASS INSULATED AND STAINLESS STEEL OVERBRAID, 15MM RUBBING FACE.
• RUBBING-K-TC-HPSSHR15MM-U-48G-22 :: SPECIAL HIGH PERFORMANCE SLED STYLE HEAD RUBBING T/C, K-TYPE, UNGROUNDED JUNCTION, 1.3LB SPRING LOADED RUBBING T/C, 48 INCH, OPEN STRIPPED 22 AWG STRANDED WIRE LEAD WITH HIGH TEMP FIBERGLASS INSULATION & JACKETING. 15MM RUBBING FACE
• RUBBING-TC-J-LS :: 36 INCH TYPE J RUBBING T/C, OPEN WIRE LEAD, 22 GAUGE STRANDED WIRE WITH FIBERGLASS INSULATION W/PVC JACKET, GROUNDED, LIGHT SPRING
• RUBBING-TC-J-U :: STANDARD RUBBING THERMOCOUPLE
• RUBBING-TC-J-U-4F :: 36 INCH TYPE J RUBBING T/C, UNGROUNDED, 24 GAUGE STRANDED WIRE LEAD WITH FIBERGLASS INSULATION
• RUBBING-TC-K-120-4T :: RUBBING T/C TYPE K, GROUNDED, 120 INCH STRANDED TEFLON LEAD, OPEN EXPOSED WITH 1/4 STRIPPED LEAD.
• RUBBING-TC-K-360-4T-OG :: 360 INCH TYPE K RUBBING T/C, OPEN END, GROUNDED, 24 GAUGE STRANDED WIRE WITH FLUOROPOLYMER INSULATION, 1/4 INCH STRIPPED (EXPOSED WIRE)
• RUBBING-TC-K-HP-36-4F :: High Performance, K-Type Rubbing, Grounded Junction T/C, 36IN, Stranded 24Awg. Open Wire Lead, Fiberglass Wire Insulation with Yellow Jacketing, Leads Exposed 2inches with 1/4inch Stripped (Exposed Wire)
• RUBBING-TC-K-HP-4F-22 :: HIGH PERFORMANCE, K-TYPE RUBBING T/C 36IN, STRANDED 22AWG OPEN WIRE LEAD, FIBERGLASS WIRE INSULATION, GROUNDED JUNCTION
• RUBBING-TC-K-HP-4G :: High Performance, K-Type Rubbing T/C 36IN, Stranded 22Awg. Open Wire Lead, High Temp Fiberglass Wire Insulation, Grounded Junction
• RUBBING-TC-K-HP-M-U :: High Performance, K-Type Rubbing T/C, 36” IN, Stranded 22Awg., Fiberglass Wire Insulation, Ungrounded Junction w/t Yellow Wire Cover Jacketing, w/t Molded-On Mini Plug
• RUBBING-TC-K-HP-U-4F-22 :: High Performance, K-Type, Rubbing T/C, 36IN, Stranded 22Awg. Open Wire Lead, Fiberglass Wire Insulation, Ungrounded Junction
• RUBBING-TC-K-MPG-24-4F :: 24 INCH TYPE K RUBBING T/C, MOLDED MINI PLUG, GROUNDED, SOLID 24 GAUGE STRANDED FIBERGLASS LEAD
• RUBBING-TC-K-MPG-60-4T :: K TYPE SPRING LOADED RUBBING T/C, GROUNDED, 60 IN TEFLON INSULATED 34 GAUGE STRANDED WIRE, PUT ON MINI PLUG.
• RUBBING-TC-K-MPSRULCV72R4F-MAGNET :: 72 INCH RUBBING T/C, MINI PLUG WITH STRAIN RELIEF, MAGNET, SILICONE VIBRATION RESISTANCE, STRANDED FIBERGLASS WIRE W/ SS OVERBRAID.
• RUBBING-TC-K-MPU-36-R4T :: 36 INCH TYPE K RUBBING T/C, PUT ON MINI PLUG, UNGROUNDED, 24 GAUGE STRANDED FLUOROPOLYMER INSULATED LEAD WITH STAINLESS STEEL OVERBRAID
• RUBBING-TC-K-SU-36-4T :: TYPE K RUBBING T/C, STD MOLDED PLUG, UNGROUNDED, 36 IN STRANDED TEFLON WIRE LEAD.
• RUBBING-TC-K-U-HP-4G :: High Performance, K-Type ungrounded 36IN, Stranded 22Awg. Open Wire Lead, High Temp Fiberglass Wire Insulation, UnGrounded Junction
• RUBBINGTC-KMU120 :: 120 IN TYPE K UNGROUNDED WIRE RUBBING T/ C SPRING LOADED
• RW-T25MU22KAHLC3-4K20 :: Rework Originally Ordered P/N # T25MU24KAHLE3-2K24 (S/O#1201549) to T25MU22KAHLC3-4K20 by putting new Transition w/t Ceramic LC-Potted Material and Replacing Wire with 3” Inch, 20 Awg. Stranded Wire with Kapton Insulation & Jacketing, w/t Molded on Mini-Plug
• S 14S-125 :: STAINLESS SLUG 1/4 NPT X 125
• S 14S-18S 250 :: STAINLESS SLUG 1/4 NPT 1/8 NPT X 250
• SC-T21MU6KCS-NO LOGO :: 1/8 X 6 IN, TYPE K, Ungrounded, 304 Stainless Steel Probe, Molded On MINI PLUG, NO LOGO304 Stainless Steel Probe, Molded On MINI PLUG, NO LOGO
• SGS-SHED-ASSM-01 :: 30” J-Type, J30-2-507, 30AWG Solid Teflon Insulation, Put on Mini-Jack to 0.125” OD x 5” Tube w/Epoxy Fill, Put on Mini-Plug not attached
• SN99 :: 10 FT TOTAL LENGTH INCLUDING THERMISTOR ASSEMBLY
• SPL-T26MU30KAILC6-4T :: 1/16 X 30 IN UNGROUNDED TYPE K T/C, MINI MOLDED PLUG, INCONEL SHEATH, LC FILLED TRANS, STRANDED TEFLON LEAD.
• SS-TUBE-1/2 :: SS TUBE-1/2 304L SS TUBE SHIP IN 10FT LENGTHS 1/2 X .035 WALL
• SS-TUBE-1/4 :: SS TUBE-1/4 304L SS TUBE SHIP IN 10FT L ENGTHS 250 X .035 WALL
• SS-TUBE-3/8 :: 304L SS TUBE .375 X 035 10 FT LENGTHS
• SUB-T25OU3KAILCA12RF :: SUB ASSEMBLY
• SUB-T25OU6KAILCA12RF :: SUB ASSEMBLY
• SW1MCG-FIT-04954 :: 1/16''-27 FNPT Weld Bung, 304 Stainless Steel, 0.400'' Height/Length Including Hex, Thread Starts @ Hex End, 5/8'' Hex Head
• SW2HCGCOMP04941 :: 1/8''-27 FNPT Weld Bung, 304 Stainless Steel, 0.400'' Height/Length Including Hex, Thread Starts @ Hex End, 5/8'' Hex Head
• SW2HCGCOMP05081 :: SW2HCG-COMP-05081
• SW2HCGCOMPS05081 :: SW2HCG-COMP-S-05081 NON-HEX END CARBON STEEL
• T-260E6KEILE360R 4TX :: TYPE K THERMOCOUPLE, 6", 30FT LEADS
• T-AMBI-NB :: THERMOCOUPLE
• T100-XX120EL :: 10 FT WIRE HARNESS BELDON CABLE CUSTOMER SUPPLIED GOLS CONNECTOR.
• T100-XX360EL :: 360 IN HARNESS CUSTOMER SUPPLIED CONNECTOR BELDON WIRE
• T100J/MP120J4T :: 120 INCH TYPE J WIRE HARNESS, PUT ON STANDARD JACK, PUT ON MINI PLUG, 24 GAUGE STRANDED WIRE LEAD WITH FLUOROPOLYMER INSULATION
• T100J/P24JR4F :: 24 IN TYPE J WIRE HARNESS, PUT ON STD PLUG AND PUT ON STD JACK, STRANDED FIBERGLASS LEAD W/ SS OVERBRAID.
• T100J/XX30ELK4T-20 :: 30 INCH TYPE K WIRE HARNESS, PUT ON STANDARD JACK W/STRAIN RELIEF, CUSTOMER SUPPLIED AVL CONNECTOR W/STRAIN RELIEF, 20 GAUGE STRANDED WIRE LEAD WITH FLUOROPOLYMER INSULATION (K20-4-507), (MADE 30 INCHES FROM TIP OF AVL BV2566 CONNECTOR TO THE TIP OF THE STANDARD JACK +/- 1 INCH)
• T100M/J360KR2F :: 360 INCH TYPE K WIRE HARNESS, MOLDED ON MINI PLUG, PUT ON STANDARD JACK, 24 GAUGE SOLID WIRE LEAD WITH FIBERGLASS INSULATION WITH STAINLESS STEEL OVERBRAID
• T100M/M-T180-S4T :: Thermocouple Extension Harness, T-Type, 180” Inch or 15’ Ft. 24Awg. Stranded Wire w/t Teflon FEP (507) Insulation & Jacket, Molded-on Mini-Plug on One Side / Molded-on Mini-Plug on Other Side.